Copper Sculptures  
               by               
        RL Baroni        

Large Spiral Flow 72" - Height: 72", Width: 36"; Depth: 36"; $900
This magnificent Water Fountain is a towering six feet. Water is pumped up through the main spiral trunk to gurgle down over fourteen dazzling, colored pods.  There are five flowers and fifty-eight leaves that add massive color to the background.  This sculpture is made from 100% hand cut and shaped copper and is welded together with a special copper alloy.  The heat treating process is responsible for the beautiful coloring and the colors in the copper is protected with a thin lacquer coating.  The fountain is mounted in a 16 point copper base (6"h x 30"round).

Reverse Spiral, Dual Flow - Height:  47", Width: 24"; Depth:  23" $495
This Water Fountain has dual streams flowing from top to bottom and generates excellent sound.  Water is pumped up through the main spiral branch to gurgle down over eighteen pods.  There is a background of five flowers and forty-seven leaves.  It is sculptured from 100% hand cut copper and welded together with a special copper alloy.  Our heat treating process develops stunning colors and these colors are protected with a thin clear lacquer coating.  The sculpture is mounted into an eight point copper base (5"h x 24"round).

Spiral Flow - 38'' High - Height: 38", Width: 20"; Depth: 20"; $495

This Water Fountain is 38" tall and has a variable flow rate. Water is pumped up through the main spiral trunk to gurgle down over seven colored pods.  There are five Morning Glory flowers, more than a dozen leaves and eight green patina lily pads that add massive color to the arrangement.  This sculpture is made from 100% hand cut and shaped copper and is welded together with special alloys.  The heat treating process is responsible for the beautiful coloring that is protected with a thin lacquer coating.  The fountain is mounted in an eight point copper base (5 1/2"h x 18" octal).  A matching copper stand (30" to 36" high x 18" in diameter) is available for $119.

Fountain Of Glory 23: - Height: 23", Width: 14"; Depth: 14"; $375

This Water Fountain is 23" tall with a variable flow rate. Water is pumped up through the main trunk to gurgle down over nine dazzling, colored pods.  There are four Morning Glory flowers, more than two dozen green patina leaves.  This sculpture is made from 100% hand cut and shaped copper and welded together with a special copper alloy.  The heat treating process is responsible for the beautiful coloring that is protected with a thin lacquer coating.  The fountain is mounted in a six sided deep drawn copper base or a round hand crafted pottery base (4 1/2"deep x 14" hexagonal/or round).  This fountain was created for table-top viewing but can be used with a matching copper stand (30" to 36" high x 16" in diameter) and is available for $119.

Fountain Of Glory 19 - Height: 19", Width: 14"; Depth: 14"; $335

This Water Fountain is 21" tall with a variable flow rate. Water is pumped up through the main trunk to gurgle down over seven dazzling, colored pods.  There are three Morning Glory flowers, more than two dozen green patina leaves.  This sculpture is made from 100% hand cut and shaped copper and hand cut is welded together.  The heat treating process is responsible for the beautiful coloring that is protected with a thin lacquer coating.  The fountain is placed into a hand crafted, round pottery base (4 1/2"deep x 14" round). This fountain was created for table-top viewing but can be used with a matching copper stand (30" to 36" high x 14" in diameter) and is available for $119.

Wall Quad Path Water Flow - Height:  48", Width: 28"; Depth:  8"  $825  SOLD

The Wall Water Fountain is designed to mount to an outside wall.  Water is pumped up through the outside main branch frame to gurgle down over four different paths over 23 leaf pods.  There is a background of three Morning Glory flowers and framed with forty leaves.  This fountain is sculptured from 100% hand cut and formed copper and welded together.  The heat treating process develops the beautiful coloring on the foliage.  The leaf pods were allowed to patina with a special process.  The colors are protected with a thin clear lacquer coating.  The sculpture is mounted into a copper base (5"high x 24"wide x 8" deep).

Wall Water Fountain: Quad Paths - Height:  48", Width: 30"; Depth:  8"  $850  SOLD

The Wall Water Fountain is designed to mount to an outside wall.  Water is pumped up through the outside main branch frame to gurgle down over four different paths over 31 leaf pods.  There is a background of three Morning Glory flowers and framed with more than forty leaves.  This fountain is sculptured from 100% hand cut and formed copper and welded together.  The heat treating process develops the beautiful coloring on the foliage.  The leaf pods were allowed to patina with a special process.  The colors are protected with a thin clear lacquer coating.  The sculpture is mounted into a copper base (5"high x 24"wide x 8" deep).

Spiny The Swamp Beast –Height: 21" & 30"  Width: 28 "; Depth:  13"  $725
What kind of creature is this Spiny Swamp Beast?  This reptile, bird, animal or monster will skulk this dismal swamp feasting on mushrooms and whatever.  This creature will also spew water from its' opening mouth every 20 seconds. But look at it closely and it looks almost friendly.  This beast is sculptured from 100% pure copper by hand cutting and forming; then gas welding it together.  The heat treating process develops all those nasty colors and is protected by a dry slime lacquer coating.  It is perched in a colorful copper swamp base (8"h x 24"w x 10"d with granite & mushrooms). 

Asian Serenity –Height: 25" Width: 15 "; Depth:  13.5" - $425

A peaceful scene is captured in this Asian motif.  A bamboo limb bows to the weight of a mystical stone while supplying a flow of water that cascades over the slate surface to create a serene atmosphere.  The sound of this water flow is very soothing.  Two additional bamboo limbs, with their colorful autumn leaves, submit gracefully to the wind. This sculpture is made from 100% copper and is hand cut, shaped and welded together with copper.  The heat treating process is provides the magnificent colors that are protected with a thin lacquer coating.  The sculpture is mounted in a round ceramic basin or a hammered copper base (4.5"deep x 13.5" diameter).  This sculpture was created for table-top viewing or can be displayed on a matching copper stand (36" high x 16" in diameter) and is available for $119.

Bubbling Well - Height: 23"; Width: 15"; Depth: 14"; - $425 SOLD
This
 fountain that delivers outstanding sound without splashing.  From the top flower, a stream of water flows into a lower flower, grasping air as it plunges into the third flower creating bubbles and a soothing sound.  This sculpture is made from 100% copper and is hand cut, shaped and welded together.  The heat treating process is provides the magnificent colors that are protected with a thin lacquer coating.  The sculpture is mounted in a round Crystalline Pottery Basin (Designed for RL Baroni in Seagrove, NC) or a hammered copper base (4.5 “deep x 13.5” diameter).  This sculpture was created for table-top viewing or can be displayed on a matching copper stand (36" high x 14" in diameter) and is available for $119.

Bubbling Well - Height: 27"; Width: 20"; Depth: 14"; - $475
This fountain delivers a number of different sounds without splashing.  The sound is changed by inserting different combinations of four copper pins (a loud gurgling to a soothing flow).  From the top flower, a stream of water flows into a middle flower, grasping air as it plunges into the third flower creating bubbles and a soothing sound.  This sculpture is made from 100% copper and is hand cut, shaped and welded together.  The heat treating process provides the magnificent colors that are protected with a thin lacquer coating.  The sculpture is mounted in a round
Crystalline Pottery Basin (Designed for RL Baroni in Seagrove, NC) or a fluted copper base (4.5 “deep x 13.5” diameter).  This sculpture was created for table-top viewing or can be displayed on a matching copper stand (36" high x 14" in diameter) and is available for $95.

A Twist Of Scarlet - Height: 21"; Width: 12"; Depth" 12"; - $395
A dual path of water quietly flows through a twisting path of eleven brightly colored scarlet pods cascading into a colorful copper basin.  Scarlet foliage enhances the scene. This sculpture is made from 100% copper and is hand cut, shaped and welded together.  The heat treating process is provides the magnificent colors that are protected with a thin lacquer coating.  The sculpture is mounted in a round ceramic basin or a hammered copper base (4.5"deep x 13.5" diameter).  This sculpture was created for table-top viewing or can be displayed on a matching copper stand (36" high x 14" in diameter) and is available for $119.

Fountain Stand - Crossed Legs - Height:  24" to 36”, Width: 16"; Depth: 16" -    $119

These stands can be used to display Water Fountains, Abstract Art, Natural Art or even pots of live flowers.  Sculptured from 100% copper - hand cut, formed and welded with the heat treating process creating a multitude of colors (no paint applied – a clear lacquer is used to preserve the colors).  The stands come with either straight up legs or crossed legs.  The three legs, in each type, are constructed to eliminate rocking on uneven floors and provide excellent stability.

Fountain Stand - Straight Legs - Height:  24" to 36”, Width: 16"; Depth: 16" -    $119

These stands can be used to display Water Fountains, Abstract Art, Natural Art or even pots of live flowers.  Sculptured from 100% copper - hand cut, formed and welded with the heat treating process creating a multitude of colors (no paint applied – a clear lacquer is used to preserve the colors).  The stands come with either straight up legs or crossed legs.  The three legs, in each type, are constructed to eliminate rocking on uneven floors and provide excellent stability.


© 2000 - 2023 powered by
Doteasy Web Hosting